2 Way LNB SAT Smart Priority Switch

The 2 Way LNB SAT Smart Priority Switch is a Safe Way to connect Two Satellite Receivers to a Single Output LNB at the same time without damaging your equipment.

Please Note Only ONE Receiver Will Work at A Time.

Please Note this is not the same as a standard splitter.

• Connection of 2 SAT receiver at 1 coax cable (Master/Slave connection)
• Master output: receiver (1) connected and control LNB output / program switching
• Slave output: receiver (2) connected and control LNB output/program switching only, if the Receiver (1) is switched off / Standby
• Receiver Off/Standby is defined by no DC
• Control signal is 13 V / 18 V, 22 KHz ON/OFF, DiSEqC from receiver 1/2
• LNB Splitter

Connector:

Satellite distributor for connecting 2 x satellite receivers to 1 x coaxial cable. With precisely fitting master socket and slave connection, 1 x F-socket input to 2 x F-socket outputs

Signal

Frequency range: 950 MHz ~ 2400 MHz. Switching signals 13 V / 18 V22 KHz ON/OFFDiSEqC from the receiver 1/2. The off state or Stand-by mode of the receiver is set at 0V DC

Transmission

SAT switch is suitable for a very high signal strength such as Ultra HD 4K / UHD / Full HD / HD / SD / 3D. Distributes a satellite TV signal from one LNB to two SAT receivers for cable TV. Diode decoupled