WHYTE WSCR506 5×6 SkyQ™ dSCR Multiswitch


Cascade 5 In 6 Out dSCR or Legacy
(May require a PSU: WPSU-0.8 – WPSU-2.5)
4 Year Warranty

WHYTE WSCR506 5×6 SkyQ™ dSCR Multiswitch

The Whyte WSCR506 5×6 is a Cascadable 6 way dSCR Multiswitch which enables seamless integration with conventional IRS Systems due to extremely low power consumption, low loss passive trunks and high gain Terrestrial.

This makes the new Series D range from Whyte the most versatile and easy to install dSCR Multiswitch range available.

Each subscriber output provides SkyQ, Legacy, TV and Radio.

Satellite subscriber signal levels in both Legacy and dSCR mode are automatically set to 85dBμV.

Terrestrial signal levels are controlled via a manual Gain Control knob and a selectable Protean Tap which permits a wide range of TERR input signal levels from 50 to 108dBμV.

The reception of 2 satellites can easily be achieved by utilising 2 Wideband LNB’s and switching the unit to Wideband LNB mode.

The unit can be powered directly via the DC input port or be remotely powered via the trunk lines.

Main Features:

  • Inbuilt LTE filter
  • Comes with Earth Bars fitted
  • Uncomplicated DC powering option
  • Switchable 12V DC supply to TERR input
  • Compatible with Quattro and Wideband LNB’s
  • Easy integration with conventional IRS systems
  • High Gain TERR with Gain Control and Protean Tap
  • Extremely low power consumption eg. WSCR504 (Min/ Max) 0.1A/0.28A
  • Balanced dSCR and Legacy output signal levels (AGC) for easy system planning
  • Quattro LNB for single satellite 5 Wire system or 2 Wideband LNB’s for 2 Sat reception


Frequency Range SAT Wideband 290-2340MHz
SAT Quattro 950-2150MHz
TERR 87-790MHz
Dual Satellite Reception SAT Wideband (2x WB LNB) YES
Trunk Inputs (F-Type Female) 4 SAT + 1 TERR
Trunk Outputs (F-Type Female) 4 SAT + 1 TERR
Tap Outputs (F-Type Female) 6
Gain SAT -5dB ~ +25dB (AGC)
TERR 8dB ±2dB
Gain Control SAT AGC
Input Levels Min / Max SAT 64 ~ 104dBμV
TERR 52 ~ 102dBμV
Trunk Through Loss SAT <-5dB
TERR <-5dB
Return Loss SAT Trunk Input / Output >10dB / >10dB
TERR Trunk Input / Output >8dB / >8dB
Tap Output >8dB
Max Output Level SAT 89dBμV (AGC)
Protean Tap™ (A ttenuation Switch) TERR 0 / -10 / -20dB
Isolation Trunk Port to Port >36dB
Tap Port to Port >43dB
Trunk DC Pass SAT (per trunk) YES (2A Max)
Impedance 75Ω
Compatibility (Auto Switching) Legacy
Switching Commands Legacy 13/18V / 22kHz / DiSEqC
dSCR/Legacy Mode Indication (per port) LED (dSCR Flash)
Power Supply Voltage 18V DC
Powering Via DC In YES
Via SAT Trunks YES
Via Apartment NO
Power Consumption Min / Max @ 18V 0.1A / 0.15A
Power Indication LED
Masthead Supply (switchable) TERR Input Only 12V DC 100mA
Earth Terminal Bars (Tap Outputs) Fitted
Earth Lug Up to 6mm² core
Dimensions including Earth Bars W x L x H (mm) 190 x 190 x 43
Weight 660g


There are no reviews yet.

Be the first to review “WHYTE WSCR506 5×6 SkyQ™ dSCR Multiswitch”

Your email address will not be published. Required fields are marked *

    Enquire about this product